How To Hack Wifi Passwords In Android 100% Working

How to Hack a Wifi password with or without root? In this post, I will tell you all the working ways to hack wifi passwords easily.

Wi-Fi plays an important role in our digital lives, keeping us connected wherever we go. However, there comes a time when you forget your Wi-Fi password or you need to access someone else’s Wi-Fi. So, In this article, I will tell you all the methods to hack Wifi passwords and provide a step-by-step guide on how to hack Wifi passwords In Android 100% working.

Many people are asking if can we crack someone else WiFi password and whether it is possible or not. The honest answer is “yes”. You can hack Wifi passwords on Android devices by using some tools and knowledge.

If you have a very strong WiFi signal near your home, college, cafe, and other places and its speed is also good and you do not remember its password and want to crack its password, then in today’s article, you are going to learn how you can hack WiFi passwords from your PC and Android phone.

Disclaimer: Please Me And My Team won’t be held responsible for any illegal activity. These WiFi hacking tricks are used for, It’s just for knowledge and education purposes, just use this for educational purposes.

How To Hack Wifi Password On Android 100% working

Before proceeding to the main article I would like to share some necessary wifi information with you guys. If you already know, then you can leave this part.

Types of Wifi password protection?

1. WEP (Wired Equivalent Privacy)

The most famous in the world and still usually uses Wi-Fi security. But also the most insecure. You can easily hack such as Wi-Fi Security.

2. WPA (Wi-Fi Protected Access)

WPA is an updated version of WEP security. It was launched in 2003. But an American hacker found some unusual security defects in the WPA network keys. Which will also make it easier to hack.

3. WPS (Wi-Fi Protected Setup)

Last but not least, it is the only Wi-Fi access that is not easy to hack. Yes, In some cases, people could do this but this needed advanced hacking skills. So if someone uses WPA 2PSK security then it can be a little difficult to hack.

Method 1: Windows Commands to Get the Password

This method only works to recover Wi-Fi network passwords only if you have previously connected to Wi-Fi. In other words, it only works if you have forgotten the password you used earlier. To use the command follow the below steps.

  1. First, open Command Prompt With administrative privileges.
  2. Now type this command “netsh wlan show profile”
  3. This will bring up an option called User Profiles – they are all Wi-Fi networks that you have connected and saved. Select the one you want to receive the password.
  4. Now, type this command “netsh wlan show profile name=”XXXXXXXX” key=clear” (Replace The XXXX with the network name).
  5. Then new data comes in, look under security settings for the contents of the line. The word presented is the Wi-Fi password/key you are missing.

Method 2: Using Revere App

Here I go with our second method of Wi-Fi password hacking with Android.

1. First of all, if your Android phone is not rooted, try to root it.

2. Then download and install Bcmon, this is important as it helps in monitoring mode on your Broadcom chipset which helps in pin cracking.

3. After installation, run the application and tap on the “Monitor Mode” option.

4. Download and install the Revere app that helps crack the WPS Pinto that retrieves the WPA2 passphrase.

5. After installing the Reaver app, launch it and perform an on-screen confirmation, which confirms that you are not using it for an illegal purpose, then tap on the APN or access point you want to crack. Most of the time, you may need to verify “monitor mode” to proceed, and this will open BCmon again.

6. Verify your settings and also make sure that you have checked the Automatic Advanced Settings box.

7. Finally, start the cracking process by tapping attack, in this last step, it can take 2-10 hours for WPS cracking to succeed.

Method 3: Using WPS WPA TESTER

How to hack wifi password on android

The WPS application hacks the WPS router with only limited features. But it is an advanced app to Hack Wi-Fi from Android mobile without rooting. You can check the wireless security of your router with this Android app.

This Wi-Fi hacking tool works in both Rooted And Non-Rooted Android phones. So you can easily crack the Wi-Fi password from your Android phone without rooting your Android phone with this app.

Method 4: Hack Wifi On Android Using AndroDumper App

How to hack wifi password on android

By the way, here is another WiFi hacking app without rooting Android. Andro Dumper App is the best Android application that helps you to Hack Wi-Fi on Android on non-rooted Android devices. Just follow the steps given below to hack the Wi-Fi password:

1. First of all, You have to download and install the AndroDumper App.

2. After successful installation, open that app on your Android device.

3. Now press the refresh button at the top of the screen in the app.

4. Select the try to connect option from the pop-up and this app finds the wifi password in a few seconds.

Okay, you can try this app, if the above apps are not working properly. Then You Should Try To hack Very Low-Security Wifi.

Method 5:  Hack Wifi Using Routersploit In Termux ( Latest Method )

Hack Wifi On Android

Install Routersploit In Termux

1. Open Termux and type this command

 apt update && apt upgrade

2. Now type this command

 pkg install python

3. Now Type

 pkg install git

4. After That Type this command

 git clone https://www.github.com/threat9/routersploit

5. Now Copy Or Type this command

 cd routersploit

6. Then type

 python3 -m pip install -r requirements.txt

7. Now type or Copy This

 python3 rsf.py

That’s it. Now Follow Our Below Steps.

How To Use Routersploit In Termux

Step 1. Install Or Clone The Repository:

1. So at first, you have to clone the repository from Github, by typing the following command :

2. Open your Termux App and type It Will Run The Router Sploit

sudo python3 rsf.py

Step 2:

1. So the module you will be using is auto spawn so you can just type

Use scanners/autospawn

and this should put us into the auto-spawn module now you might notice this is somewhat like Metasploit and it works kind of the same way

2. I Am using a scanner module to find vulnerabilities in the router. Now if you are a beginner you can assume one of the most common IP addresses is 192.168.1.0, You can go ahead and try that.. now, in this case, there should be a router there, so you can type :

show options

How To Hack Wifi On Android

3. So you can see here it is waiting for a target IP address, Now you can go ahead and type :

set target 192.168.1.0

How To Hack Wifi Password On Android

and it will run all the known exploits against the target and see if it is vulnerable to any of them, A green sign will appear on the left side of the exploits If there are not any vulnerabilities that means that at least according to what routers

4. Now you can also take router sploit to the next level by using something like Nmap

5. After that, you need to change the target and the port number

  • set target 192.168.1.1 
  • set port 81

6. You can also run a Nmap scan to scan your network and pass the IP address and the open ports to the router sploit. So now you can hit the run

run

7. Now you just found a vulnerability, and you can use the exploit

8. Now you just have to type:

use exploits/routers/Linksys/eseries_themoon_rce

9. You can check whether the target is vulnerable or not, just by typing the check command

Hack Wifi From Android

10. You can see here that, the target is vulnerable, to exploit it You just have to run, type

run

How To Hack Wifi Password On Android

11. Now You can see what kind of payloads are available by typing

show payloads

How To Hack Wifi Password On Android

12. Now You can use any payload You want to use,

So that’s how a router can be exploited…But in your case, the exploit may be different, So go ahead and try once on your network.

Method 6: Hacking Wifi password in Android using the WPS Connect app

Using the Wi-Fi WPS Connect app you can hack Wifi passwords on Android. The app runs on both rooted and non-rooted (Lollipop and above) phones. However, it is preferred for rooted devices essentially because of the database data.

If you’ve got a Wi-Fi network with WPS security on your Android device, you can easily connect to it without entering a password. The WPS Connect app bypasses WPS Wi-Fi security and connects to Wi-Fi without entering a password.

  • Download and install the Wi-Fi WPS Connect app on your Android device.
  • Enable the Wi-Fi settings of your phone.
  • Open the WPS Connect app and click on the scan button to scan all nearby Wi-Fi networks.
  • It takes a few sec to show all nearby Wi-Fi networks, including their details (such as password security types, signal strength, etc.).
  • Choose a Wi-Fi network and click on it if you wish to hack. A pop-up screen appears with a pre-defined list of keys (PIN).
  • Tap on the key to start your hacking process.
  • The app attempts many times to hack Wifi with default keys and the most generally used Wi-Fi keys.
  • Wait for a few minutes, and the Wi-Fi password will be hacked successfully.

How to Secure Wifi Networks?

Here’s a list of some suggestions that will make your Wi-Fi network secure and better:

  • Change the default passwords that come with the router.
  • Grant access to some registered and chosen devices.
  • Limit the number of devices that can connect at the same time.
  • Use a mixture of numbers, alphabets, and special characters in your password to protect it from any kind of attack.
  • Using a Firewall can defend your network from any kind of unofficial attacks.

Conclusion

So, After Reading The Article You May Have Now understood How To Hack a Wifi Password By Using The Above Methods. All The methods Which Are Discussed Above Are Working And tested by Many Users. All The Methods Are Easy To Use If You Follow All The Mentioned Steps Properly.

If You Have Any Problem Regarding Any method Feel Free To Comment Here And I Will Try To Solve Your Problem As Soon As Possible.

FAQs:

1. Is it possible to hack WiFi?

Yes, If you want to hack a WiFi password with your Android device without rooting your device. you can simply download Wps Wpa Tester from the play store

2. Is it possible to hack WPA2 WiFi?

It’s the only really effective way to restrict access to your home Wi-Fi network. But WPA2 encryption can be cracked, too — here’s how. As usual, this isn’t a guide to cracking someone’s WPA2 encryption. … It works even if you’re using WPA2-PSK security with strong AES encryption

3. Is it possible to hack WiFi using Android?

Yes It is possible, You Can Read Our Full Article For Full Details.

4. What is the most common WiFi password?
  • 123456 (Unchanged)
  • Password (Unchanged)
  • 12345678 (Up 1)
  • qwerty (Up 2)
  • 12345 (Down 2)
  • 123456789 (New)
  • letmein (New)
  • 1234567 (Unchanged)
  1. Learn How Instagram Accounts Are Getting Hacked
  2. How Hackers Are Hacking Your Facebook Account

Was this article helpful?

Yes
No
Thanks for your feedback!

Altaf Hassan a tech and gaming enthusiast with over 3 years of experience. He likes writing about tech, games, android tips, and how-to's. He loves playing games and learning new things about tech. That's why he created this website to share information.

7 Comments on “How To Hack Wifi Passwords In Android 100% Working”

  1. Thank you for the auspicious writeup. It in fact was a amusement account it. Look advanced to far added agreeable from you! By the way, how can we communicate?|

    Reply

Leave a Comment

Share via
Copy link